********** ENTERTAINMENT **********
return to top
Elliot Page on Juno, Hollywood’s dark side and coming out twice
Sat, 10 Jun 2023 06:00:14 GMT
When the feelgood movie made him an Oscar-nominated star, the strain of hiding who he was almost forced him to quit acting. He explains how opening up about being gay, then trans, saved his life
Elliot Page’s memoir is called Pageboy. At its heart is the story of his transitioning from an Oscar-nominated actress, best known for the wonderful coming-of-age comedy drama Juno, to one of the world’s most high profile trans men. He writes, rather beautifully, about gender dysphoria, top surgery and finally finding himself. But the book is so much more than a tale of transition.
Pageboy is a modern-day Hollywood Babylon, written by a sensitive soul rather than a scandalmonger. Page depicts a film industry even more rancid than we may have suspected. This is a world where it’s not only the Harvey Weinsteins at the top of the pyramid who get to abuse the young and powerless – just about everybody seems to have a go. It’s a world where most people appear to be closeted in one way or another, a world where more acting is done off set than on.
Continue reading...No one wants to see the cast naked any more, so this TV follow-up shuns stripping for comic capers and cost-of-living tragedy. Even better, it actually gives plotlines to the female characters
Television shows that remake films tend to be exercises in pointless nostalgia. Do you remember the movies Fatal Attraction, Dangerous Liaisons and American Gigolo? Yes. Would you like to watch a weird cosplay version of them that goes on for 10 hours and confusingly reshuffles the plot? Um, not really. The Full Monty (from 14 June, Disney+) is the latest entrant in an already tired genre, but it has one up on most of the competition: all the core cast are in that sweet spot where they’re successful enough to be worth rehiring but not so famous they’ve turned the reboot down. That means there’s no need to rejig the story of redundant Sheffield steelworkers who, in 1997, found solace in hard times by forming a Chippendales-style male striptease troupe. We simply return to Sheffield 26 years later, to find the same characters, played by the same actors, living the same lives.
The film had it easy, plot-wise, in that it built towards that heartwarming climactic moment when a sextet of men showed the local community their penises. Those six appendages were the pegs on which were hung serious subtexts about the misery of life in a Thatcher-ravaged, deindustrialised northern England. A quarter of a century on, however, the prospect of the old boys windmilling their hosepipes in housewives’ faces would horrify everyone. So the new Full Monty is fully clothes-on.
Continue reading...
Animation has come a long way since 1900, when J. Stuart Blackton created The Enchanted Drawing, the earliest known animated film. The 90-second movie was created using stop-motion techniques, as flat characters, props, and backgrounds were drawn on an easel or made from paper.
Most modern animators rely on computer graphics and visualization techniques to create popular movies and TV shows like Finding Dory, Toy Story, and Paw Patrol. In the 1960s and ’70s, computer science pioneers David Evans and IEEE Life Member Ivan E. Sutherland led the development of many of the technologies animators now use. Their groundbreaking research, conducted at the University of Utah, in Salt Lake City, and at their company, Evans and Sutherland, helped jump-start the computer graphics industry.
A ceremony was held at the university on 24 March to recognize the computer graphics and visualization techniques with an IEEE Milestone. The IEEE Utah Section sponsored the nomination.
Computer graphics began in the 1950s with interactive games and visualization tools designed by the U.S. military to develop technologies for aviation, radar, and rocketry.
Evans and Sutherland, then computer science professors at the University of Utah, wanted to expand on the use of such tools by finding a way for computers to simulate objects and environments. In 1968 they founded Evans and Sutherland, locating the E&S headquarters in the university’s research park.
Many of today’s computer graphics luminaries—including Pixar cofounder Edwin Catmull, Adobe cofounder John Warnock, and Netscape founder Jim Clark, who also founded Silicon Graphics—got their start in the industry as E&S employees or as doctoral students working on research at the company’s facilities.
IEEE Milestone Dedication: Utah Computer Graphics youtu.be
While at E&S, the employees and students made fundamental contributions to computer graphics processes, says IEEE Fellow Christopher Johnson, a University of Utah computer science professor.
“David Evans, Ivan Sutherland, and their students and colleagues helped change the world,” Johnson says.
“The period from 1968 through 1978 was an extraordinary time for computer graphics,” adds Brian Berg, IEEE Region 6 history chair. “There was a rare confluence of faculty, students, staff, facilities, and resources to support research into computer vision algorithms and hardware that produced remarkable developments in computer graphics and visualization techniques. This research was responsible for the birth of much of continuous-tone computer graphics as we know it today.” Continuous-tone computer graphics have a virtually unlimited range of color and shades of gray.
Evans began his career in 1955 at Bendix—an aviation electronics company in Avon, Ohio—as manager of a project that aimed to develop an early personal computer. He left to join the University of California, Berkeley, as chair of its computer science department. He also headed Berkeley’s research for the Pentagon’s Advanced Research Project Agency (now known as the Defense Advanced Research Projects Agency).
In 1963 Evans became a principal investigator for ARPA’s Project Genie. He helped develop hardware techniques that enabled commercial use of time-shared computer systems.
In 1965 the University of Utah hired him to establish its computer science department after receiving an ARPA grant of US $5 million to investigate how the emerging field of computer graphics could play a role in the country’s technological competitiveness, according to Computer Graphics and Computer Animation.
In 1968 Evans asked Sutherland, a former colleague at Berkeley who was then an associate professor of electrical engineering at Harvard, to join him at the University of Utah, luring him with the promise of starting a company together. Sutherland was already famous in computer graphics circles, having created Sketchpad, the first computer-aided design program, for his Ph.D. thesis in 1963 at MIT.
The two founded E&S almost as soon as Sutherland arrived, and they began working on computer-based simulation systems.
The duo in 1969 developed the line-drawing system displays LDS-1 and LDS-2, the first graphics devices with a processing unit. They then built the E&S Picture System—the next generation of LDS displays.
Those workstations, as they were called, came to be used by most computer-generated-imagery production companies through the 1980s.
E&S also developed computer-based simulation systems for military and commercial training, including the CT5 and CT6 flight simulators.
In addition to hiring employees, E&S welcomed computer science doctoral students from the university to work on their research projects at the company.
“Almost every influential person in the modern computer-graphics community either passed through the University of Utah or came into contact with it in some way,” Robert Rivlin wrote in his book, The Algorithmic Image: Graphic Visions of the Computer Age.
One of the doctoral students was Henri Gouraud, who in 1971 developed an algorithm to simulate the differing effects of light and color across the surface of an object. The Gouraud shading method is still used by creators of video games and cartoons.
In 1974 Edwin Catmull, then also a doctoral student at the university, developed the principle of texture mapping, a method for adding complexity to a computer-generated surface. Catmull went on to help found Pixar in 1986 with computer scientist Alvy Ray Smith, an IEEE member. For his work in the industry, Catmull received the 2006 IEEE John von Neumann Medal.
Doctoral student Bui Tuong Phong in 1973 devised Phong shading, a modeling method that reflects light so computer-generated graphics can look shiny and plasticlike.
“As a group, the University of Utah contributed more to the field of knowledge in computer graphics than any of its contemporaries,” Berg wrote in the Milestone proposal. “That fact is made most apparent both in the widespread use of the techniques developed and in the body of awards the innovations garnered.” The awards include several scientific and technical Oscars, an Emmy, and many IEEE medals.
Administered by the IEEE History Center and supported by donors, the Milestone program recognizes outstanding technical developments around the world.
The Milestone plaque displayed on a granite obelisk outside of the University of Utah’s Merrill engineering building reads:
In 1965 the University of Utah established a Center of Excellence for computer graphics research with Advanced Research Projects Agency (ARPA) funding. In 1968 two professors founded the pioneering graphics hardware company Evans & Sutherland; by 1978, fundamental rendering and visualization techniques disclosed in doctoral dissertations included the Warnock algorithm, Gouraud shading, the Catmull-Rom spline, and the Blinn-Phong reflection model. Alumni-founded companies include Atari, Silicon Graphics, Adobe, Pixar, and Netscape.
A group of researchers from NASA, MIT, and other institutions have achieved the fastest space-to-ground laser-communication link yet, doubling the record they set last year. With data rates of 200 gigabits per second, a satellite could transmit more than 2 terabytes of data—roughly as much as 1,000 high-definition movies—in a single 5-minute pass over a ground station.
“The implications are far-reaching because, put simply, more data means more discoveries,” says Jason Mitchell, an aerospace engineer at NASA’s Space Communications and Navigation program.
The new communications link was made possible with the TeraByte InfraRed Delivery (TBIRD) system orbiting about 530 kilometers above Earth’s surface. Launched into space last May, TBIRD achieved downlink rates of up to 100 Gb/s with a ground-based receiver in California by last June. This was 100 times as fast as the quickest Internet speeds in most cities, and more than 1,000 times as fast as radio links traditionally used for communications with satellites.
The fastest data networks on Earth typically rely on laser communications over fiber optics. However, a high-speed laser-based Internet does not exist yet for satellites. Instead, space agencies and commercial satellite operators most commonly use radio to communicate with objects in space. The infrared light that laser communications can employ has a much higher frequency than radio waves, enabling much higher data rates.
“There are satellites currently in orbit limited by the amount of data they are able to downlink, and this trend will only increase as more capable satellites are launched,” says Kat Riesing, an aerospace engineer and a staff member at MIT Lincoln Laboratory on the TBIRD team. “Even a hyperspectral imager—HISUI on the International Space Station—has to send data back to Earth via storage drives on cargo ships due to limitations on downlink rates. TBIRD is a big enabler for missions that collect important data on Earth’s climate and resources, as well as astrophysics applications such as black hole imaging.”
MIT Lincoln Laboratory conceived TBIRD in 2014 as a low-cost, high-speed way to access data on spacecraft. A key way it reduced expenses was by using commercial, off-the-shelf components originally developed for terrestrial use. These include high-rate optical modems developed for fiber telecommunications and high-speed large-volume storage to hold data, Riesing says.
Located onboard NASA’s Pathfinder Technology Demonstrator 3 (PTD-3) satellite, TBIRD was carried into orbit on SpaceX’s Transporter-5 rideshare mission from Cape Canaveral Space Force Station in Florida on 25 May 2022. The PTD-3 satellite is a roughly 12-kilogram CubeSat about the size of two stacked cereal boxes, and its TBIRD payload is no larger than the average tissue box. “Industry’s drive to small, low-power, high-data-rate optical transceivers enabled us to achieve a compact form factor suitable even for small satellites,” Mitchell says.
“There are satellites currently in orbit limited by the amount of data they are able to downlink, and this trend will only increase as more-capable satellites are launched.” —Kat Riesing, aerospace engineer, MIT Lincoln Laboratory
The development of TBIRD faced a number of challenges. To start with, terrestrial components are not designed to survive the rigors of launching to and operating in space. For example, during a thermal test simulating the extreme temperatures the devices might face in space, the fibers in the optical signal amplifier melted.
The problem was that, when used as originally intended, the atmosphere could help cool the amplifier through convection. When tested in a vacuum, simulating space, the heat that the amplifier generated was trapped. To solve the issue, the researchers worked with the amplifier’s vendor to modify it so that it released heat through conduction instead.
In addition, laser beams from space to Earth can experience distortion from atmospheric effects and weather conditions. This can cause power loss, and in turn data loss, for the beams.
To compensate, the scientists developed their own version of automatic repeat request (ARQ), a protocol for controlling errors in data transmission over a communications link. In this arrangement, the ground terminal uses a low-rate uplink signal to let the satellite know that it has to retransmit any block of data, or frame, that has been lost or damaged. The new protocol lets the ground station tell the satellite which frames it received correctly, so the satellite knows which ones to retransmit and not waste time sending data it doesn’t have to.
Another challenge the scientists faced stemmed from how lasers form in much narrower beams than radio transmissions. For successful data transmission, these beams must be aimed precisely at their receivers. This is often accomplished by mounting the laser on a gimbal. Due to TBIRD’s small size, however, it instead maneuvers the CubeSat carrying it to point it at the ground, using any error signals it receives to correct the satellite’s orientation. This gimbal-less strategy also helped further shrink TBIRD, making it cheaper to launch.
TBIRD’s architecture can support multiple channels through wavelength separation to enable higher data rates, Riesing says. This is how TBIRD accomplished a 200-Gb/s downlink on 28 April—by using two 100-Gb/s channels, she explains. “This can scale further on a future mission if the link is designed to support it,” Riesing notes.
“Put simply, more data means more discoveries.” —Jason Mitchell, aerospace engineer, NASA
The research team’s next step is to explore where to apply this technology in upcoming missions. “This technology is particularly useful for science missions where collecting a lot of data can provide significant benefits,” Riesing says. “One mission concept that is enabled by this is the Event Horizon Explorer mission, which will extend the exciting work of the Event Horizon Telescope in imaging black holes with even higher resolution.”
The scientists also want to explore how to extend this technology to different scenarios, such as geostationary orbit, Riesing says. Moreover, Mitchell says, they are looking at ways to push TBIRD’s capabilities as far away as the moon, in order to support future missions there. The rates under consideration are in the 1- to 5-Gb/s range, which “may not seem like much of an improvement, but remember the moon is roughly 400,000 km away from Earth, which is quite a long distance to cover,” Mitchell says.
The new technology may also find use in high-speed atmospheric data links on the ground. “For example, from building to building, or across inhospitable terrain, such as from mountaintop to mountaintop, where the cost of laying fiber systems could be exorbitant,” Riesing says.
On a gin-clear December day, I’m sitting under the plexiglass bubble of a radically new kind of aircraft. It’s a little past noon at the Byron Airport in northern California; in the distance, a jagged line of wind turbines atop rolling hills marks the Altamont Pass, blades spinning lazily. Above me, a cloudless blue sky beckons.
The aircraft, called BlackFly, is unlike anything else on the planet. Built by a Palo Alto, Calif., startup called Opener, it’s an electric vertical take-off and landing (eVTOL) aircraft with stubby wings fore and aft of the pilot, each with four motors and propellers. Visually, it’s as though an aerial speedster from a 1930s pulp sci-fi story has sprung from the page.
There are a couple of hundred startups designing or flying eVTOLs. But only a dozen or so are making tiny, technologically sophisticated machines whose primary purpose is to provide exhilarating but safe flying experiences to people after relatively minimal training. And in that group, Opener has jumped out to an early lead, having built dozens of aircraft at its facilities in Palo Alto and trained more than a score of people to fly them.
My own route to the cockpit of a BlackFly was relatively straightforward. I contacted the company’s CEO, Ken Karklin, in September 2022, pitched him on the idea of a story and video, and three months later I was flying one of his aircraft.
Well, sort of flying it. My brief flight was so highly automated that I was more passenger than pilot. Nevertheless, I spent about a day and a half before the flight being trained to fly the machine manually, so that I could take control if anything went wrong. For this training, I wore a virtual-reality headset and sat in a chair that tilted and gyrated to simulate flying maneuvers. To “fly” this simulation I manipulated a joystick that was identical to the one in the cockpit of a BlackFly. Opener’s chief operating officer, Kristina L. Menton, and engineer Wyatt Warner took turns patiently explaining the operations of the vehicle and giving me challenging tasks to complete, such as hovering and performing virtual landings in a vicious crosswind.
The BlackFly is entirely controlled by that joystick, which is equipped with a trigger and also topped by a thumb switch. To take off, I squeeze the trigger while simultaneously pushing forward on the switch. The machine leaps into the air with the sound of a million bees, and with a surge of giddy elation I am climbing skyward.
Much more so than an airplane or helicopter, the BlackFly taps into archetypal human yearnings for flight, the kind represented by magic carpets, the flying cars in “The Jetsons,” and even those Mountain Banshees in the movie “Avatar.” I’ve had several unusual experiences in aircraft, including flying on NASA’s zero-gravity-simulating “Vomit Comet,” and being whisked around in a BlackFly was definitely the most absorbing and delightful. Gazing out over the Altamont Pass from an altitude of about 60 meters, I had a feeling of joyous release—from Earth’s gravity and from earthly troubles.
For technical details about the BlackFly and to learn more about its origin, go here.
The BlackFly is also a likely harbinger of things to come. Most of the startups developing eVTOLs are building vehicles meant to carry several passengers on commercial runs of less than 50 kilometers. Although the plan is for these to be flown by pilots initially, most of the companies anticipate a day when the flights will be completely automated. So specialized aircraft such as the BlackFly—designed to be registered and operated as “ultralight” aircraft under aviation regulations—could provide mountains of invaluable data on highly and fully automated flying and perhaps even help familiarize people with the idea of flying without a pilot. Indeed, during my flight, dozens of sensors gathered gigabytes of data, to add to the large reservoir Opener has already collected during many hundreds of test flights so far.
As of late February 2023, Opener hadn’t yet announced a retail price or an official commercial release date for the aircraft, which has been under development and testing for more than a decade. I’ll be keeping an eye out for further news of the company. Long after my flight was over I was still savoring the experience, and hoping for another one.
Special thanks to IEEE.tv for collaborating on production of this video.
Non-fungible tokens (NFTs) are the most popular digital assets today, capturing the attention of cryptocurrency investors, whales and people from around the world. People find it amazing that some users spend thousands or millions of dollars on a single NFT-based image of a monkey or other token, but you can simply take a screenshot for free. So here we share some freuently asked question about NFTs.
NFT stands for non-fungible token, which is a cryptographic token on a blockchain with unique identification codes that distinguish it from other tokens. NFTs are unique and not interchangeable, which means no two NFTs are the same. NFTs can be a unique artwork, GIF, Images, videos, Audio album. in-game items, collectibles etc.
A blockchain is a distributed digital ledger that allows for the secure storage of data. By recording any kind of information—such as bank account transactions, the ownership of Non-Fungible Tokens (NFTs), or Decentralized Finance (DeFi) smart contracts—in one place, and distributing it to many different computers, blockchains ensure that data can’t be manipulated without everyone in the system being aware.
The value of an NFT comes from its ability to be traded freely and securely on the blockchain, which is not possible with other current digital ownership solutionsThe NFT points to its location on the blockchain, but doesn’t necessarily contain the digital property. For example, if you replace one bitcoin with another, you will still have the same thing. If you buy a non-fungible item, such as a movie ticket, it is impossible to replace it with any other movie ticket because each ticket is unique to a specific time and place.
One of the unique characteristics of non-fungible tokens (NFTs) is that they can be tokenised to create a digital certificate of ownership that can be bought, sold and traded on the blockchain.
As with crypto-currency, records of who owns what are stored on a ledger that is maintained by thousands of computers around the world. These records can’t be forged because the whole system operates on an open-source network.
NFTs also contain smart contracts—small computer programs that run on the blockchain—that give the artist, for example, a cut of any future sale of the token.
Non-fungible tokens (NFTs) aren't cryptocurrencies, but they do use blockchain technology. Many NFTs are based on Ethereum, where the blockchain serves as a ledger for all the transactions related to said NFT and the properties it represents.5) How to make an NFT?
Anyone can create an NFT. All you need is a digital wallet, some ethereum tokens and a connection to an NFT marketplace where you’ll be able to upload and sell your creations
When you purchase a stock in NFT, that purchase is recorded on the blockchain—the bitcoin ledger of transactions—and that entry acts as your proof of ownership.
The value of an NFT varies a lot based on the digital asset up for grabs. People use NFTs to trade and sell digital art, so when creating an NFT, you should consider the popularity of your digital artwork along with historical statistics.
In the year 2021, a digital artist called Pak created an artwork called The Merge. It was sold on the Nifty Gateway NFT market for $91.8 million.
Non-fungible tokens can be used in investment opportunities. One can purchase an NFT and resell it at a profit. Certain NFT marketplaces let sellers of NFTs keep a percentage of the profits from sales of the assets they create.
Many people want to buy NFTs because it lets them support the arts and own something cool from their favorite musicians, brands, and celebrities. NFTs also give artists an opportunity to program in continual royalties if someone buys their work. Galleries see this as a way to reach new buyers interested in art.
There are many places to buy digital assets, like opensea and their policies vary. On top shot, for instance, you sign up for a waitlist that can be thousands of people long. When a digital asset goes on sale, you are occasionally chosen to purchase it.
To mint an NFT token, you must pay some amount of gas fee to process the transaction on the Etherum blockchain, but you can mint your NFT on a different blockchain called Polygon to avoid paying gas fees. This option is available on OpenSea and this simply denotes that your NFT will only be able to trade using Polygon's blockchain and not Etherum's blockchain. Mintable allows you to mint NFTs for free without paying any gas fees.
The answer is no. Non-Fungible Tokens are minted on the blockchain using cryptocurrencies such as Etherum, Solana, Polygon, and so on. Once a Non-Fungible Token is minted, the transaction is recorded on the blockchain and the contract or license is awarded to whoever has that Non-Fungible Token in their wallet.
You can sell your work and creations by attaching a license to it on the blockchain, where its ownership can be transferred. This lets you get exposure without losing full ownership of your work. Some of the most successful projects include Cryptopunks, Bored Ape Yatch Club NFTs, SandBox, World of Women and so on. These NFT projects have gained popularity globally and are owned by celebrities and other successful entrepreneurs. Owning one of these NFTs gives you an automatic ticket to exclusive business meetings and life-changing connections.
That’s a wrap. Hope you guys found this article enlightening. I just answer some question with my limited knowledge about NFTs. If you have any questions or suggestions, feel free to drop them in the comment section below. Also I have a question for you, Is bitcoin an NFTs? let me know in The comment section below
The Justice Department unsealed charges against two Russian nationals Friday, accusing them of hacking the now-defunct Mt. Gox cryptocurrency exchange to steal what at the time was nearly half a billion dollars in bitcoin BTCUSD and conspiring to launder the proceeds.The DOJ alleges that Alexey Bilyuchenko and Aleksandr Verner gained unauthorized access to the exchange starting in 2011 and over the next three years illegally transferred 670,000 bitcoins to addresses controlled by them.“As cyber criminals have become more sophisticated in their methods of thievery, our career prosecutors and law enforcement partners, too, have become experts in the latest technologies being abused for malicious purposes,” said Damian Williams, the U.S. Attorney for the Southern District of New York, in a statement.
Market Pulse Stories are Rapid-fire, short news bursts on stocks and markets as they move. Visit MarketWatch.com for more information on this news.
 |
Imagine a world in which you can do transactions and many other things without having to give your personal information. A world in which you don’t need to rely on banks or governments anymore. Sounds amazing, right? That’s exactly what blockchain technology allows us to do.
It’s like your computer’s hard drive. blockchain is a technology that lets you store data in digital blocks, which are connected together like links in a chain.
Blockchain technology was originally invented in 1991 by two mathematicians, Stuart Haber and W. Scot Stornetta. They first proposed the system to ensure that timestamps could not be tampered with.
A few years later, in 1998, software developer Nick Szabo proposed using a similar kind of technology to secure a digital payments system he called “Bit Gold.” However, this innovation was not adopted until Satoshi Nakamoto claimed to have invented the first Blockchain and Bitcoin.
A blockchain is a distributed database shared between the nodes of a computer network. It saves information in digital format. Many people first heard of blockchain technology when they started to look up information about bitcoin.
Blockchain is used in cryptocurrency systems to ensure secure, decentralized records of transactions.
Blockchain allowed people to guarantee the fidelity and security of a record of data without the need for a third party to ensure accuracy.
To understand how a blockchain works, Consider these basic steps:
Let’s get to know more about the blockchain.
Blockchain records digital information and distributes it across the network without changing it. The information is distributed among many users and stored in an immutable, permanent ledger that can't be changed or destroyed. That's why blockchain is also called "Distributed Ledger Technology" or DLT.
Here’s how it works:
And that’s the beauty of it! The process may seem complicated, but it’s done in minutes with modern technology. And because technology is advancing rapidly, I expect things to move even more quickly than ever.
Even though blockchain is integral to cryptocurrency, it has other applications. For example, blockchain can be used for storing reliable data about transactions. Many people confuse blockchain with cryptocurrencies like bitcoin and ethereum.
Blockchain already being adopted by some big-name companies, such as Walmart, AIG, Siemens, Pfizer, and Unilever. For example, IBM's Food Trust uses blockchain to track food's journey before reaching its final destination.
Although some of you may consider this practice excessive, food suppliers and manufacturers adhere to the policy of tracing their products because bacteria such as E. coli and Salmonella have been found in packaged foods. In addition, there have been isolated cases where dangerous allergens such as peanuts have accidentally been introduced into certain products.
Tracing and identifying the sources of an outbreak is a challenging task that can take months or years. Thanks to the Blockchain, however, companies now know exactly where their food has been—so they can trace its location and prevent future outbreaks.
Blockchain technology allows systems to react much faster in the event of a hazard. It also has many other uses in the modern world.
Blockchain technology is safe, even if it’s public. People can access the technology using an internet connection.
Have you ever been in a situation where you had all your data stored at one place and that one secure place got compromised? Wouldn't it be great if there was a way to prevent your data from leaking out even when the security of your storage systems is compromised?
Blockchain technology provides a way of avoiding this situation by using multiple computers at different locations to store information about transactions. If one computer experiences problems with a transaction, it will not affect the other nodes.
Instead, other nodes will use the correct information to cross-reference your incorrect node. This is called “Decentralization,” meaning all the information is stored in multiple places.
Blockchain guarantees your data's authenticity—not just its accuracy, but also its irreversibility. It can also be used to store data that are difficult to register, like legal contracts, state identifications, or a company's product inventory.
Blockchain has many advantages and disadvantages.
I’ll answer the most frequently asked questions about blockchain in this section.
Blockchain is not a cryptocurrency but a technology that makes cryptocurrencies possible. It's a digital ledger that records every transaction seamlessly.
Yes, blockchain can be theoretically hacked, but it is a complicated task to be achieved. A network of users constantly reviews it, which makes hacking the blockchain difficult.
Coinbase Global is currently the biggest blockchain company in the world. The company runs a commendable infrastructure, services, and technology for the digital currency economy.
Blockchain is a decentralized technology. It’s a chain of distributed ledgers connected with nodes. Each node can be any electronic device. Thus, one owns blockhain.
Bitcoin is a cryptocurrency, which is powered by Blockchain technology while Blockchain is a distributed ledger of cryptocurrency
Generally a database is a collection of data which can be stored and organized using a database management system. The people who have access to the database can view or edit the information stored there. The client-server network architecture is used to implement databases. whereas a blockchain is a growing list of records, called blocks, stored in a distributed system. Each block contains a cryptographic hash of the previous block, timestamp and transaction information. Modification of data is not allowed due to the design of the blockchain. The technology allows decentralized control and eliminates risks of data modification by other parties.
Blockchain has a wide spectrum of applications and, over the next 5-10 years, we will likely see it being integrated into all sorts of industries. From finance to healthcare, blockchain could revolutionize the way we store and share data. Although there is some hesitation to adopt blockchain systems right now, that won't be the case in 2022-2023 (and even less so in 2026). Once people become more comfortable with the technology and understand how it can work for them, owners, CEOs and entrepreneurs alike will be quick to leverage blockchain technology for their own gain. Hope you like this article if you have any question let me know in the comments section
FOLLOW US ON TWITTER
Non-fungible tokens (NFTs) are the most popular digital assets today, capturing the attention of cryptocurrency investors, whales and people from around the world. People find it amazing that some users spend thousands or millions of dollars on a single NFT-based image of a monkey or other token, but you can simply take a screenshot for free. So here we share some freuently asked question about NFTs.
NFT stands for non-fungible token, which is a cryptographic token on a blockchain with unique identification codes that distinguish it from other tokens. NFTs are unique and not interchangeable, which means no two NFTs are the same. NFTs can be a unique artwork, GIF, Images, videos, Audio album. in-game items, collectibles etc.
A blockchain is a distributed digital ledger that allows for the secure storage of data. By recording any kind of information—such as bank account transactions, the ownership of Non-Fungible Tokens (NFTs), or Decentralized Finance (DeFi) smart contracts—in one place, and distributing it to many different computers, blockchains ensure that data can’t be manipulated without everyone in the system being aware.
The value of an NFT comes from its ability to be traded freely and securely on the blockchain, which is not possible with other current digital ownership solutionsThe NFT points to its location on the blockchain, but doesn’t necessarily contain the digital property. For example, if you replace one bitcoin with another, you will still have the same thing. If you buy a non-fungible item, such as a movie ticket, it is impossible to replace it with any other movie ticket because each ticket is unique to a specific time and place.
One of the unique characteristics of non-fungible tokens (NFTs) is that they can be tokenised to create a digital certificate of ownership that can be bought, sold and traded on the blockchain.
As with crypto-currency, records of who owns what are stored on a ledger that is maintained by thousands of computers around the world. These records can’t be forged because the whole system operates on an open-source network.
NFTs also contain smart contracts—small computer programs that run on the blockchain—that give the artist, for example, a cut of any future sale of the token.
Non-fungible tokens (NFTs) aren't cryptocurrencies, but they do use blockchain technology. Many NFTs are based on Ethereum, where the blockchain serves as a ledger for all the transactions related to said NFT and the properties it represents.5) How to make an NFT?
Anyone can create an NFT. All you need is a digital wallet, some ethereum tokens and a connection to an NFT marketplace where you’ll be able to upload and sell your creations
When you purchase a stock in NFT, that purchase is recorded on the blockchain—the bitcoin ledger of transactions—and that entry acts as your proof of ownership.
The value of an NFT varies a lot based on the digital asset up for grabs. People use NFTs to trade and sell digital art, so when creating an NFT, you should consider the popularity of your digital artwork along with historical statistics.
In the year 2021, a digital artist called Pak created an artwork called The Merge. It was sold on the Nifty Gateway NFT market for $91.8 million.
Non-fungible tokens can be used in investment opportunities. One can purchase an NFT and resell it at a profit. Certain NFT marketplaces let sellers of NFTs keep a percentage of the profits from sales of the assets they create.
Many people want to buy NFTs because it lets them support the arts and own something cool from their favorite musicians, brands, and celebrities. NFTs also give artists an opportunity to program in continual royalties if someone buys their work. Galleries see this as a way to reach new buyers interested in art.
There are many places to buy digital assets, like opensea and their policies vary. On top shot, for instance, you sign up for a waitlist that can be thousands of people long. When a digital asset goes on sale, you are occasionally chosen to purchase it.
To mint an NFT token, you must pay some amount of gas fee to process the transaction on the Etherum blockchain, but you can mint your NFT on a different blockchain called Polygon to avoid paying gas fees. This option is available on OpenSea and this simply denotes that your NFT will only be able to trade using Polygon's blockchain and not Etherum's blockchain. Mintable allows you to mint NFTs for free without paying any gas fees.
The answer is no. Non-Fungible Tokens are minted on the blockchain using cryptocurrencies such as Etherum, Solana, Polygon, and so on. Once a Non-Fungible Token is minted, the transaction is recorded on the blockchain and the contract or license is awarded to whoever has that Non-Fungible Token in their wallet.
You can sell your work and creations by attaching a license to it on the blockchain, where its ownership can be transferred. This lets you get exposure without losing full ownership of your work. Some of the most successful projects include Cryptopunks, Bored Ape Yatch Club NFTs, SandBox, World of Women and so on. These NFT projects have gained popularity globally and are owned by celebrities and other successful entrepreneurs. Owning one of these NFTs gives you an automatic ticket to exclusive business meetings and life-changing connections.
That’s a wrap. Hope you guys found this article enlightening. I just answer some question with my limited knowledge about NFTs. If you have any questions or suggestions, feel free to drop them in the comment section below. Also I have a question for you, Is bitcoin an NFTs? let me know in The comment section below
Each January, the editors of IEEE Spectrum offer up some predictions about technical developments we expect to be in the news over the coming year. You’ll find a couple dozen of those described in the following special report. Of course, the number of things we could have written about is far higher, so we had to be selective in picking which projects to feature. And we’re not ashamed to admit, gee-whiz appeal often shaped our choices.
For example, this year’s survey includes an odd pair of new aircraft that will be taking to the skies. One, whose design was inspired by the giant airships of years past, is longer than a football field; the other, a futuristic single-seat vertical-takeoff craft powered by electricity, is about the length of a small car.
While some of the other stories might not light up your imagination as much, they highlight important technical issues the world faces—like the challenges of shifting from fossil fuels to a hydrogen-based energy economy or the threat that new plutonium breeder reactors in China might accelerate the proliferation of nuclear weapons. So whether you prefer reading about topics that are heavy or light (even lighter than air), you should find something here to get you warmed up for 2023.
This article appears in the January 2023 print issue.
Top Tech 2023: A Special Report
Preview exciting technical developments for the coming year.
Can This Company Dominate Green Hydrogen?
Fortescue will need more electricity-generating capacity than France.
Pathfinder 1 could herald a new era for zeppelins
A New Way to Speed Up Computing
Blue microLEDs bring optical fiber to the processor.
The Personal-Use eVTOL Is (Almost) Here
Opener’s BlackFly is a pulp-fiction fever dream with wings.
Baidu Will Make an Autonomous EV
Its partnership with Geely aims at full self-driving mode.
China Builds New Breeder Reactors
The power plants could also make weapons-grade plutonium.
Economics Drives a Ray-Gun Resurgence
Lasers should be cheap enough to use against drones.
A Cryptocurrency for the Masses or a Universal ID?
What Worldcoin’s killer app will be is not yet clear.
The company’s Condor chip will boast more than 1,000 qubits.
Vagus-nerve stimulation promises to help treat autoimmune disorders.
New satellites can connect directly to your phone.
The E.U.’s first exascale supercomputer will be built in Germany.
A dozen more tech milestones to watch for in 2023.
If electric vertical takeoff and landing aircraft do manage to revolutionize transportation, the date of 5 October 2011, may live on in aviation lore. That was the day when a retired mechanical engineer named Marcus Leng flew a home-built eVTOL across his front yard in Warkworth, Ont., Canada, startling his wife and several of his friends.
“So, take off, flew about 6 feet above the ground, pitched the aircraft towards my wife and the two couples that were there, who were behind automobiles for protection, and decided to do a skidding stop in front of them. Nobody had an idea that this was going to be happening,” recalls Leng.
But as he looked to set his craft down, he saw a wing starting to dig into his lawn. “Uh-oh, this is not good,” he thought. “The aircraft is going to spin out of control. But what instead happened was the propulsion systems revved up and down so rapidly that as the aircraft did that skidding turn, that wing corner just dragged along my lawn exactly in the direction I was holding the aircraft, and then came to a stable landing,” says Leng. At that point, he knew that such an aircraft was viable “because to have that sort of an interference in the aircraft and for the control systems to be able to control it was truly remarkable.”
It was the second time anyone, anywhere had ever flown an eVTOL aircraft.
Today, some 350 organizations in 48 countries are designing, building, or flying eVTOLs, according to the Vertical Flight Society. These companies are fueled by more than US $7 billion and perhaps as much as $10 billion in startup funding. And yet, 11 years after Leng’s flight, no eVTOLs have been delivered to customers or are being produced at commercial scale. None have even been certified by a civil aviation authority in the West, such as the U.S. Federal Aviation Administration or the European Union Aviation Safety Agency.
But 2023 looks to be a pivotal year for eVTOLs. Several well-funded startups are expected to reach important early milestones in the certification process. And the company Leng founded, Opener, could beat all of them by making its first deliveries—which would also be the first for any maker of an eVTOL.
Today, some 350 organizations in 48 countries are designing, building, or flying eVTOLs, according to the Vertical Flight Society.
As of late October, the company had built at its facility in Palo Alto, Calif., roughly 70 aircraft—considerably more than are needed for simple testing and evaluation. It had flown more than 30 of them. And late in 2022, the company had begun training a group of operators on a state-of-the-art virtual-reality simulator system.
Opener’s highly unusual, single-seat flier is intended for personal use rather than transporting passengers, which makes it almost unique. Opener intends to have its aircraft classified as an “ultralight,” enabling it to bypass the rigorous certification required for commercial-transport and other aircraft types. The certification issue looms as a major unknown over the entire eVTOL enterprise, at least in the United States, because, as the blog Jetlaw.com noted last August, “the FAA has no clear timeline or direction on when it will finalize a permanent certification process for eVTOL.”
Opener’s strategy is not without risks, either. For one, there’s no guarantee that the FAA will ultimately agree that Opener’s aircraft, called BlackFly, qualifies as an ultralight. And not everyone is happy with this approach. “My concern is, these companies that are saying they can be ultralights and start flying around in public are putting at risk a $10 billion [eVTOL] industry,” says Mark Moore, founder and chief executive of Whisper Aero in Crossville, Tenn. “Because if they crash, people won’t know the difference” between the ultralights and the passenger eVTOLs, he adds. “To me, that’s unacceptable.” Previously, Moore led a team at NASA that designed a personal-use eVTOL and then served as engineering director at Uber’s Elevate initiative.
A BlackFly eVTOL took off on 1 October, 2022, at the Pacific Airshow in Huntington Beach, Calif. Irfan Khan/Los Angeles Times/Getty Images
Opener’s aircraft is as singular as its business model. It’s a radically different kind of aircraft, and it sprang almost entirely from Leng’s fertile mind.
“As a kid,” he says, “I already envisioned what it would be like to have an aircraft that could seamlessly do a vertical takeoff, fly, and land again without any encumbrances whatsoever.” It was a vision that never left him, from a mechanical-engineering degree at the University of Toronto, management jobs in the aerospace industry, starting a company and making a pile of money by inventing a new kind of memory foam, and then retiring in 1996 at the age of 36.
The fundamental challenge to designing a vertical-takeoff aircraft is endowing it with both vertical lift and efficient forward cruising. Most eVTOL makers achieve this by physically tilting multiple large rotors from a vertical rotation axis, for takeoff, to a horizontal one, for cruising. But the mechanism for tilting the rotors must be extremely robust, and therefore it inevitably adds substantial complexity and weight. Such tilt-rotors also entail significant compromises and trade-offs in the size of the rotors and their placement relative to the wings.
Read about author Glenn Zorpette’s flight in a BlackFly here
Opener’s BlackFly ingeniously avoids having to make those trade-offs and compromises. It has two wings, one in front and one behind the pilot. Affixed to each wing are four motors and rotors—and these never change their orientation relative to the wings. Nor do the wings move relative to the fuselage. Instead, the entire aircraft rotates in the air to transition between vertical and horizontal flight.
To control the aircraft, the pilot moves a joystick, and those motions are instantly translated by redundant flight-control systems into commands that alter the relative thrust among the eight motor-propellers.
Visually, it’s an astounding aircraft, like something from a 1930s pulp sci-fi magazine. It’s also a triumph of engineering.
Leng says the journey started for him in 2008, when “I just serendipitously stumbled upon the fact that all the key technologies for making electric VTOL human flight practical were coming to a nexus.”
The journey that made Leng’s dream a reality kicked into high gear in 2014 when a chance meeting with investor Sebastian Thrun at an aviation conference led to Google cofounder Larry Page investing in Leng’s project.
Leng started in his basement in 2010, spending his own money on a mélange of home-built and commercially available components. The motors were commercial units that Leng modified himself, the motor controllers were German and off the shelf, the inertial-measurement unit was open source and based on an Arduino microcontroller. The batteries were modified model-aircraft lithium-polymer types.
“The main objective behind this was proof of concept,” he says.“I had to prove it to myself, because up until that point, they were just equations on a piece of paper. I had to get to the point where I knew that this could be practical.”
After his front-yard flight in 2011, there followed several years of refining and rebuilding all of the major components until they achieved the specifications Leng wanted. “Everything on BlackFly is from first principles,” he declares.
The motors started out generating 160 newtons (36 pounds) of static thrust. It was way too low. “I actually tried to purchase motors and motor controllers from companies that manufactured those, and I specifically asked them to customize those motors for me, by suggesting a number of changes,” he says. “I was told that, no, those changes won’t work.”
So he started designing his own brushless AC motors. “I did not want to design motors,” says Leng. “In the end, I was stunned at how much improvement we could make by just applying first principles to this motor design.”
Eleven years after Leng’s flight, no eVTOLs have been delivered to customers or are being produced at commercial scale.
To increase the power density, he had to address the tendency of a motor in an eVTOL to overheat at high thrust, especially during hover, when cooling airflow over the motor is minimal. He began by designing a system to force air through the motor. Then he began working on the rotor of the motor (not to be confused with the rotor wings that lift and propel the aircraft). This is the spinning part of a motor, which is typically a single piece of electrical steel. It’s an iron alloy with very high magnetic permeability.
By layering the steel of the rotor, Leng was able to greatly reduce its heat generation, because the thinner layers of steel limited the eddy currents in the steel that create heat. Less heat meant he could use higher-strength neodymium magnets, which would otherwise become demagnetized. Finally, he rearranged those magnets into a configuration called a Halbach array. In the end Leng’s motors were able to produce 609 newtons (137 lbs.) of thrust.
Overall, the 2-kilogram motors are capable of sustaining 20 kilowatts, for a power density of 10 kilowatts per kilogram, Leng says. It’s an extraordinary figure. One of the few motor manufacturers claiming a density in that range is H3X Technologies, which says its HPDM-250 clocks in at 12 kw/kg.
The brain of the BlackFly consists of three independent flight controllers, which calculate the aircraft’s orientation and position, based on readings from the inertial-measurement units, GPS receivers, and magnetometers. They also use pitot tubes to measure airspeed. The flight controllers continually cross-check their outputs to make sure they agree. They also feed instructions, based on the operator’s movement of the joystick, to the eight motor controllers (one for each motor).
Equipped with these sophisticated flight controllers, the fly-by-wire BlackFly is similar in that regard to the hobbyist drones that rely on processors and clever algorithms to avoid the tricky manipulations of sticks, levers, and pedals required to fly a traditional fixed- or rotary-wing aircraft.
That sophisticated, real-time control will allow a far larger number of people to consider purchasing a BlackFly when it becomes available. In late November, Opener had not disclosed a likely purchase price, but in the past the company had suggested that BlackFly would cost as much as a luxury SUV. So who might buy it? CEO Ken Karklin points to several distinct groups of potential buyers who have little in common other than wealth.
There are early tech adopters and also people who are already aviators and are “passionate about the future of electric flight, who love the idea of being able to have their own personal vertical-takeoff-and-landing, low-maintenance, clean aircraft that they can fly in rural and uncongested areas,” Karklin says. “One of them is a business owner. He has a plant that’s a 22-mile drive but would only be a 14-mile flight, and he wants to install charging infrastructure on either end and wants to use it to commute every day. We love that.”
Others are less certain about how, or even whether, this market segment will establish itself. “When it comes to personal-use eVTOLs, we are really struggling to see the business case,” says Sergio Cecutta, founder and partner at SMG Consulting, where he studies eVTOLs among other high-tech transportation topics. “I’m not saying they won’t sell. It’s how many will they sell?” He notes that Opener is not the only eVTOL maker pursuing a path to success through the ultralight or some other specialized FAA category. As of early November, the list included Alauda Aeronautics, Air, Alef, Bellwether Industries, Icon Aircraft, Jetson, Lift Aircraft, and Ryse Aero Technologies.
What makes Opener special? Both Karklin and Leng emphasize the value of all that surrounds the BlackFly aircraft. For example, there are virtual-reality-based simulators that they say enable them to fully train an operator in 10 to 15 hours. The aircraft themselves are heavily instrumented: “Every flight, literally, there’s over 1,000 parameters that are recorded, some of them at 1,000 hertz, some 100 Hz, 10 Hz, and 1 Hz,” says Leng. “All that information is stored on the aircraft and downloaded to our database at the end of the flight. When we go and make a software change, we can do what’s called regression testing by running that software using all the data from our previous flights. And we can compare the outputs against what the outputs were during any specific flight and can automatically confirm that the changes that we’ve made are without any issues. And we can also compare, to see if they make an improvement.”
Ed Lu, a former NASA astronaut and executive at Google, sits on Opener’s safety-review board. He says what impressed him most when he first met the BlackFly team was “the fact that they had based their entire development around testing. They had a wealth of flight data from flying this vehicle in a drone mode, an unmanned mode.” Having all that data was key. “They could make their decisions based not on analysis, but after real-world operations,” Lu says, adding that he is particularly impressed by Opener’s ability to manage all the flight data. “It allows them to keep track of every aircraft, what sensors are in which aircraft, which versions of code, all the way down to the flights, to what happened in each flight, to videos of what’s happening.” Lu thinks this will be a huge advantage once the aircraft is released into the “real” world.
Karklin declines to comment on whether an ultralight approval, which is governed by what the FAA designates “ Part 103,” might be an opening move toward an FAA type certification in the future. “This is step one for us, and we are going to be very, very focused on personal air vehicles for recreational and fun purposes for the foreseeable future,” he says. “But we’ve also got a working technology stack here and an aircraft architecture that has considerable utility beyond the realm of Part-103 [ultralight] aircraft, both for crewed and uncrewed applications.” Asked what his immediate goals are, Karklin responds without hesitating. “We will be the first eVTOL company, we believe, in serial production, with a small but steadily growing revenue and order book, and with a growing installed base of cloud-connected aircraft that with every flight push all the telemetry, all the flight behavior, all the component behavior, all the operator-behavior data representing all of this up to the cloud, to be ingested by our back office, and processed. And that provides us a lot of opportunity.”
This article appears in the January 2023 print issue as “Finally, an eVTOL You Can Buy Soonish.”
Top Tech 2023: A Special Report
Preview exciting technical developments for the coming year.
Can This Company Dominate Green Hydrogen?
Fortescue will need more electricity-generating capacity than France.
Pathfinder 1 could herald a new era for zeppelins
A New Way to Speed Up Computing
Blue microLEDs bring optical fiber to the processor.
The Personal-Use eVTOL Is (Almost) Here
Opener’s BlackFly is a pulp-fiction fever dream with wings.
Baidu Will Make an Autonomous EV
Its partnership with Geely aims at full self-driving mode.
China Builds New Breeder Reactors
The power plants could also make weapons-grade plutonium.
Economics Drives a Ray-Gun Resurgence
Lasers should be cheap enough to use against drones.
A Cryptocurrency for the Masses or a Universal ID?
What Worldcoin’s killer app will be is not yet clear.
The company’s Condor chip will boast more than 1,000 qubits.
Vagus-nerve stimulation promises to help treat autoimmune disorders.
New satellites can connect directly to your phone.
The E.U.’s first exascale supercomputer will be built in Germany.
A dozen more tech milestones to watch for in 2023.
At Moffett Field in Mountain View, Calif., Lighter Than Air (LTA) Research is floating a new approach to a technology that saw its rise and fall a century ago: airships. Although airships have long since been supplanted by planes, LTA, which was founded in 2015 by CEO Alan Weston, believes that through a combination of new materials, better construction techniques, and technological advancements, airships are poised to—not reclaim the skies, certainly—but find a new niche.
Although airships never died off entirely—the Goodyear blimps, familiar to sports fans, are proof of that—the industry was already in decline by 1937, the year of the Hindenburg disaster. By the end of World War II, airships couldn’t compete with the speed airplanes offered, and they required larger crews. Today, what airships still linger serve primarily for advertising and sightseeing.
LTA’s Pathfinder 1 carries bigger dreams than hovering over a sports stadium, however. The company sees a natural fit for airships in humanitarian and relief missions. Airships can stay aloft for long periods of time, in case ground conditions aren’t ideal, have a long range, and carry significant payloads, according to Carl Taussig, LTA’s chief technical officer.
Pathfinder’s cigar-shaped envelope is just over 120 meters in length and 20 meters in diameter. While that dwarfs Goodyear’s current, 75-meter Wingfoot One, it’s still only half the length of the Hindenburg. LTA expects Pathfinder 1 to carry approximately 4 tonnes of cargo, in addition to its crew, water ballast, and fuel. The airship will have a top speed of 65 knots, or about 120 kilometers per hour—on par with the Hindenburg—with a sustained cruise speed of 35 to 40 knots (65 to 75 km/h).
It may not seem much of an advance to be building an airship that flies no faster than the Hindenburg. But Pathfinder 1 carries a lot of new tech that LTA is betting will prove key to an airship resurgence.
For one, airships used to be constructed around riveted aluminum girders, which provided the highest strength-to-weight ratio available at the time. Instead, LTA will be using carbon-fiber tubes attached to titanium hubs. As a result, Pathfinder 1’s primary structure will be both stronger and lighter.
Pathfinder 1’s outer covering is also a step up from past generations. Airships like the 1930s’ Graf Zeppelin had coverings made out of doped cotton canvas. The dope painted on the fabric increased its strength and resiliency. But canvas is still canvas. LTA has instead built its outer coverings out of a three-layer laminate of synthetics. The outermost layer is DuPont’s Tedlar, which is a polyvinyl fluoride. The middle layer is a loose weave of fire-retardant aramid fibers. The inner layer is polyester. “It’s very similar to what’s used in a lot of racing sailboats,” says Taussig. “We needed to modify that material to make it fire resistant and change a little bit about its structural performance.”
LTA Research
But neither the materials science nor the manufacturing advances will take primary credit for LTA’s looked-for success, according to Taussig—instead, it’s the introduction of electronics. “Everything’s electric on Pathfinder,” he says. “All the actuation, all the propulsion, all the actual power is all electrically generated. It’s a fully electric fly-by-wire aircraft, which is not something that was possible 80 years ago.” Pathfinder 1 has 12 electric motors for propulsion, as well as four tail fins with steering rudders controlled by its fly-by-wire system. (During initial test flights, the airship will be powered by two reciprocating aircraft engines).
There’s one other piece of equipment making an appearance on Pathfinder 1 that wasn’t available 80 years ago: lidar. Installed at the top of each of Pathfinder 1’s helium gas cells is an automotive-grade lidar. “The lidar can give us a point cloud showing the entire internal hull of that gas cell,” says Taussig, which can then be used to determine the gas cell’s volume accurately. In flight, the airship’s pilots can use that information, as well as data about the helium’s purity, pressure, and temperature, to better keep the craft pitched properly and to avoid extra stress on the internal structure during flight.
Although LTA’s initial focus is on humanitarian applications, there are other areas where airships might shine one day. “An airship is kind of a ‘tweener,’ in between sea cargo and air freight,” says Taussig. Being fully electric, Pathfinder 1 is also greener than traditional air- or sea-freight options.
After completing Pathfinder 1’s construction late in 2022, LTA plans to conduct a series of ground tests on each of the airship’s systems in the first part of 2023. Once the team is satisfied with those tests, they’ll move to tethered flight tests and finally untethered flight tests over San Francisco’s South Bay later in the year.
The company will also construct an approximately 180-meter-long airship, Pathfinder 3 at its Akron Airdock facility in Ohio. Pathfinder 3 won’t be ready to fly in 2023, but its development shows LTA’s aspirations for an airship renaissance is more than just hot air.
This article appears in the January 2023 print issue as “The Return of the Airship.”
Top Tech 2023: A Special Report
Preview exciting technical developments for the coming year.
Can This Company Dominate Green Hydrogen?
Fortescue will need more electricity-generating capacity than France.
Pathfinder 1 could herald a new era for zeppelins
A New Way to Speed Up Computing
Blue microLEDs bring optical fiber to the processor.
The Personal-Use eVTOL Is (Almost) Here
Opener’s BlackFly is a pulp-fiction fever dream with wings.
Baidu Will Make an Autonomous EV
Its partnership with Geely aims at full self-driving mode.
China Builds New Breeder Reactors
The power plants could also make weapons-grade plutonium.
Economics Drives a Ray-Gun Resurgence
Lasers should be cheap enough to use against drones.
A Cryptocurrency for the Masses or a Universal ID?
What Worldcoin’s killer app will be is not yet clear.
The company’s Condor chip will boast more than 1,000 qubits.
Vagus-nerve stimulation promises to help treat autoimmune disorders.
New satellites can connect directly to your phone.
The E.U.’s first exascale supercomputer will be built in Germany.
A dozen more tech milestones to watch for in 2023.
The technical challenge of missile defense has been compared with that of hitting a bullet with a bullet. Then there is the still tougher economic challenge of using an expensive interceptor to kill a cheaper target—like hitting a lead bullet with a golden one.
Maybe trouble and money could be saved by shooting down such targets with a laser. Once the system was designed, built, and paid for, the cost per shot would be low. Such considerations led planners at the Pentagon to seek a solution from Lockheed Martin, which has just delivered a 300-kilowatt laser to the U.S. Army. The new weapon combines the output of a large bundle of fiber lasers of varying frequencies to form a single beam of white light. This laser has been undergoing tests in the lab, and it should see its first field trials sometime in 2023. General Atomics, a military contractor in San Diego, is also developing a laser of this power for the Army based on what’s known as the distributed-gain design, which has a single aperture.
Both systems offer the prospect of being inexpensive to use. The electric bill itself would range “from US $5 to $10,” for a pulse lasting a few seconds, says Michael Perry, the vice president in charge of laser systems for General Atomics.
Why are we getting ray guns only now, more than a century after H.G. Wells imagined them in his sci-fi novel The War of the Worlds? Put it down partly to the rising demand for cheap antimissile defense, but it’s mainly the result of technical advances in high-energy lasers.
The old standby for powerful lasers employed chemical reactions in flowing gas. That method was clumsy, heavy, and dangerous, and the laser itself became a flammable target for enemies to attack. The advantage was that these chemical lasers could be made immensely powerful, a far cry from the puny pulsed ruby lasers that wowed observers back in the 1960s by punching holes in razor blades (at power levels jocularly measured in “gillettes”).
“With lasers, if you can see it, you can kill it.” —Robert Afzal, Lockheed Martin
By 2014, fiber lasers had reached the point where they could be considered for weapons, and one 30-kW model was installed on the USS Ponce, where it demonstrated the ability to shoot down speedboats and small drones at relatively close range. The 300-kW fiber lasers being employed now in the two Army projects emit about 100 kW in optical power, enough to burn through much heftier targets (not to mention quite a few gillettes) at considerable distances.
“A laser of that class can be effective against a wide variety of targets, including cruise missiles, mortars, UAVs, and aircraft,” says Perry. “But not reentry vehicles [launched by ballistic missiles].” Those are the warheads, and to ward them off, he says, you’d probably have to hit the rocket when it’s still in the boost phase, which would mean placing your laser in orbit. Laser tech is still far from performing such a feat.
Even so, these futuristic weapons will no doubt find plenty of applications in today’s world. Israel made news in April by field-testing an airborne antimissile laser called Iron Beam, a play on the name Iron Dome, the missile system it has used to down rockets fired from Gaza. The laser system, reportedly rated at about 100 kW, is still not in service and hasn’t seen combat, but one day it may be able to replace some, if not all, of Iron Dome’s missiles with photons. Other countries have similar capabilities, or say they do. In May, Russia said it had used a laser to incinerate a Ukrainian drone from 5 kilometers away, a claim that Ukraine’s president, Volodymyr Zelenskyy, derided.
A missile is destroyed by a low-power, 2013 version of Lockheed Martin’s fiber laser www.youtube.com
Not all ray guns must be lasers, though. In March, Taiwan News reported that Chinese researchers had built a microwave weapon that in principle could be placed in orbit from where its 5-megawatt pulses could fry the electronic heart of an enemy satellite. But making such a machine in the lab is quite different from operating it in the field, not to mention in outer space, where supplying power and removing waste heat constitute major problems.
Because lasers performance falls off in bad weather, they can’t be relied on by themselves to defend critically important targets. They must instead be paired with kinetic weapons—missiles or bullets—to create a layered defense system.
“With lasers, if you can see it, you can kill it; typically rain and snow are not big deterrents,” says Robert Afzal, an expert on lasers at Lockheed Martin. “But a thundercloud—that’s hard.”
Afzal says that the higher up a laser is placed, the less interference it will face, but there is a trade-off. “With an airplane you have the least amount of resources—least volume, least weight—that is available to you. On a ship, you have a lot more resources available, but you’re in the maritime atmosphere, which is pretty hazy, so you may need a lot more power to get to the target. And the Army is in between: It deals with closer threats, like rockets and mortars, and they need a deep magazine, because they deal with a lot more targets.”
In every case, the point is to use expensive antimissile missiles only when you must. Israel opted to pursue laser weapons in part because its Iron Dome missiles cost so much more than the unguided, largely homemade rockets they defend against. Some of the military drones that Russia and Ukraine are now flying wouldn’t break the budget of the better-heeled sort of hobbyist. And it would be a Pyrrhic victory indeed to shoot them from the sky with projectiles so costly that you went broke.
This article appears in the January 2023 print issue as “Economics Drives a Ray-Gun Resurgence .”
Top Tech 2023: A Special Report
Preview exciting technical developments for the coming year.
Can This Company Dominate Green Hydrogen?
Fortescue will need more electricity-generating capacity than France.
Pathfinder 1 could herald a new era for zeppelins
A New Way to Speed Up Computing
Blue microLEDs bring optical fiber to the processor.
The Personal-Use eVTOL Is (Almost) Here
Opener’s BlackFly is a pulp-fiction fever dream with wings.
Baidu Will Make an Autonomous EV
Its partnership with Geely aims at full self-driving mode.
China Builds New Breeder Reactors
The power plants could also make weapons-grade plutonium.
Economics Drives a Ray-Gun Resurgence
Lasers should be cheap enough to use against drones.
A Cryptocurrency for the Masses or a Universal ID?
What Worldcoin’s killer app will be is not yet clear.
The company’s Condor chip will boast more than 1,000 qubits.
Vagus-nerve stimulation promises to help treat autoimmune disorders.
New satellites can connect directly to your phone.
The E.U.’s first exascale supercomputer will be built in Germany.
A dozen more tech milestones to watch for in 2023.
RSS Rabbit links users to publicly available RSS entries.
Vet every link before clicking! The creators accept no responsibility for the contents of these entries.
Relevant
Fresh
Convenient
Agile
We're not prepared to take user feedback yet. Check back soon!
